Allows to instal motor and spur gear on front of chassis and transfer case in the middle. With machined sides that match chassis profile and lock with it once screwed .
Max spur gear is 81T 48P (44mm diameter), for other spur you must file chassis. Disassemble all spur gear parts from original trasmission and install on it, shortening axle shaft and adapting it for universal shaft.
Motor will stay very low and can interfere with 3rd member when shocks reach about 70mm length, but this depends on your axle caster angle.
One upper link must be removed and must use a 3links setup with Panhard
Includes only motor mount, aloo other parts must be disassembled from original trasmission
No customer reviews for the moment.
Your review appreciation cannot be sent
Are you sure that you want to report this comment?
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Your comment has been submitted and will be available once approved by a moderator.