Styro Colours have been specially developed for painting onto Polystyrene - Depron®, Styrofoam and many other surfaces.
Colour chartThe colours in this colour chart are only colour indications!
For best results:
Before you begin ... Remove any dirt particles from the surface to be painted.
Before use, shake the can vigorously for approx. 2 min.
Spray at a distance of approx. 20 to 30 cm.
Mask all areas that are not to be painted, by using masking film or tape. First paint the light and then the dark colours. Always check to make sure that the surface is dry and free of dust and grease before painting! Never spray just one heavy coat! Allow the paints to dry for 3 hours before removing the masking film and applying the next coat.
No customer reviews for the moment.
Your review appreciation cannot be sent
Are you sure that you want to report this comment?
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Your comment has been submitted and will be available once approved by a moderator.