Integy Temperature Control 30x30x10mm Fan 6V

OVERVIEW
Keep your temperatures in check and your motor running efficient and cool with our add-on cooling fan. This cooling fan is temperature controlled, and works with most aftermarket motor heatsinks with a 30x30mm fan mounting pattern.

IMPORTANT FAN VOLTAGE NOTE: All heatsink cooling fans, unless specified otherwise, are designed to be powered by DC voltage only between 5.0V and no more than 6.0V MAXIMUM! If you choose to power our cooling fans with voltage exceeding 6.0V you are doing so at your own risk! Please make sure that your power source (battery pack, receiver, etc.) is able to supply consistent voltage no lower than 5.0V and no higher than 6.0V. If powering from an ESC, check with the ESC manufacturer to make sure if your ESC is capable of providing enough auxiliary power to handle the added load of extra cooling fans; some ESCs that have built-in fans may not be able to reliably power any additional cooling fans.